View B82111B0000C013_804695.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Chokes and inductors
VHF chokes
Series/Type: Date: B82111B November 2005
7ffARspp
(c) EPCOS AG 2005. Reproduction, publication and dissemination of this document and the information contained therein without EPCOS' prior express consent is prohibited.
VHF chokes Ferrite core
Rated voltage 500 VAC/DC Rated current 2 to 10 A Rated inductance 3 to 25 NH Construction
Ferrite cylinder core Winding: single-layer, enamel copper wire,
B82111B
winding ends brought out as leads
Polyester insulating sleeve
Features
High resonant frequency High rated current RoHS-compatible1)
Applications
RF blocking and filtering Interference suppression in small appliances
Marking LR and IR in clear text and approval mark Delivery mode Bulk Approvals Approval mark Standard EN 60938-2 Dimensional drawing
102-5
2
1
1 2 SSB0090-A
1) RoHS-compatible is defined as compatible with the following documents: DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 13 February 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment COM (2004) 606 final Proposal for a COUNCIL DECISION amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment.
Please read the Important notes at the end of this document.
2
11/05
VHF chokes Ferrite core
General technical data Test voltage Vtest Rated inductance LR Inductance tolerance Rated current IR Inductance decrease L/L0 DC resistance Rtyp Resonance frequency fres, min Climatic category (IEC 60068-1) Current derating Iop/IR versus ambient temperature TA (rated temperature TR = 60 C) 2500 VAC, 1 min
B82111B
Measuring frequency:L 10 H = 1 MHz 10 H < L 1000 H = 100 kHz 20% Referred to 60 C ambient temperature, for derating see below 10% (referred to initial value) at DC load IR at 20 C Typical value, measured at 20 C ambient temperature Typical value, measured with Scalar Network Analyzer ZAS from Rohde & Schwarz 55/125/56 (-55 C/+125 C/56 days damp heat test)
1.2 I op IR
SSB0087-Q-E
1.0
0.8
0.6
0.4
0.2
0
0
20
40
60
80
100
C 140 TA
Mounting information
When bending the leads, take care that the bending point is at least 3 mm apart from the face ends of the core and that the start-of-winding-areas are not subjected to any mechanical stress.
Please read the Important notes at the end of this document.
3
11/05
VHF chokes Ferrite core
Characteristics and ordering codes IR A 2 3 3 3 3 4 4 4 6 6 6 9 10 LR H 17 8 13 20 25 6 11 15 4 6 9 3 5 Rtyp 0.063 0.025 0.024 0.054 0.046 0.017 0.020 0.024 0.014 0.010 0.012 0.006 0.005 fres MHz 100 145 170 125 85 170 150 120 205 200 150 220 175 Dimensions (mm) l1-1.5 18.3 18.3 24.5 24.5 28.5 18.3 24.5 28.5 18.3 24.5 28.5 24.5 28.5 l2-3 24 24 29 29 34 24 29 34 24 29 34 29 34 d1 max. d2 7.0 7.0 6.5 6.0 8.5 7.5 6.5 8.5 7.5 7.0 9.0 7.5 9.5 0.45 0.63 0.67 0.5 0.63 0.75 0.71 0.75 0.8 0.95 0.95 1.2 1.3 Approx. weight g 3.0 3.0 3.5 3.5 6.0 3.0 6.0 7.0 4.0 5.0 8.0 5.0 10.0
B82111B
Ordering code
B82111B0000C014 B82111B0000C013 B82111B0000C019 B82111B0000C020 B82111B0000C024 B82111B0000C012 B82111B0000C018 B82111B0000C023 B82111B0000C011 B82111B0000C017 B82111B0000C022 B82111B0000C016 B82111B0000C021
Please read the Important notes at the end of this document.
4
11/05
Impedance |Z | versus frequency f (typical values) B82111B0000C011...C014
10 6 |Z | 10 5 B82111B |Z | 10 5
IND0154-3
B82111B0000C016...C020
10 6 B82111B
IND0155-1
10 4
10 4
10 3
_ C014 _ C013 _ C012 _ C011
10 3
_ C020 _ C019 _ C018 _ C017 _ C016
10 8 Hz f 10 9
10 2 7 10
10 8
Hz f
10 9
10 2 7 10
B82111B0000C021...C024
10 6 |Z | 10 5 B82111B
IND0156-R
10 4
10 3
_ C024 _ C023 _ C022 _ C021
10 2 7 10
10 8
Hz f
10 9
Please read the Important notes at the end of this document.
5
11/05
Important notes
The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as "hazardous"). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, CeraDiode, CSSP, PhaseCap, PhaseMod, SilverCap, SIFI, SIMID, SIKOREL, SIOV, SIP5D, SIP5K, TOPcap, UltraCap, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks.
6
11/05

▲Up To Search▲

Price & Availability of B82111B0000C013

	To Download B82111B0000C013 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .